Machine vibration analyzer

AI Vibration Spectrum Analyzer

Upload Spectrum

Select Spectrum Image

Machine Information

Machine RPM Peak Frequency (CPM) Overall Velocity (mm/s)

Machine Asset Information

Machine Name Equipment ID

Analysis Result

Waiting for Analysis...

Possible Fault Summary

Frequency	Possible Fault
0.5 × RPM	Mechanical Looseness / Rubbing / Oil Whirl
1 × RPM	Rotor Unbalance / Bent Shaft / Eccentricity
2 × RPM	Misalignment / Bent Shaft
3 × RPM	Looseness
3 × RPM – 4 × RPM HIGHER SIDE	Mechanical Looseness / Coupling Problem,Soft Foot,Structural Resonance
Medium (20 Hz to 2,000 Hz)	Shows common issues like rotor unbalance or bad alignment.
High (Over 2,000 Hz)	Points to damaged gear teeth or worn-out bearings.
Low (Under 20 Hz)	Often means structural looseness or issues with slow rotating parts
High Frequency	Bearing Defect / Gear Mesh / Lubrication Failure
Blade Pass	Cavitation / Hydraulic Problem
1 × RPM HIGHER & 2X, 3X lower	Rotor Unbalance

AI Vibration Analyzer Version 1.0

Vibration Data Upload

Upload CSV Spectrum Data

Machine Health Dashboard

Waiting For Data...